2.4 litre Fiat Dino Spider and Coupé

Engine:

Configuration:	6 cylinders in 65° V. 4 OHC, cast iron block
Type:	135 C 000
Capacity:	2418cc
Bore x Stroke:	92.5mm x 60mm
Compression Ratio:	9:1
Max Power:	180bhp (DIN), 188 (SAE) at 6,600 rpm
Max Torque:	159 lbs/ft (DIN), 164 lbs/ft (SAE) at 4,600 rpm
Carburation:	3 x Webers 40 DCNF
Cooling:	Water
Firing Order:	1, 4, 2, 5, 3, 6
Spark Plugs:	Champion N60Y or Bosch W300T 30

Transmission:

Desc:	5 Speed ZF with limited slip differential
Type:	S5-18/3
Ratios:	1st: 2.991, 2nd: 1.763, 3rd: 1.301, 4th: 1.00, 5th: 0.874, Optional 5th: 0.79(not available through Fiat), Reverse: 3.670
Clutch:	Single plate, cable control, 228mm diameter (same parts as Fiat 130)

Suspension:

Front:	Independent, control arms, coil springs, 2 hydraulic shock absorbers, anti-roll bar
Rear:	Independent, 2 shock absorbers, anti-roll bar

Steering:

Type:	Worm and roller
Steering column:	Universally-jointed
Steering box:	Gemmer (France) - same as 2 litre

Brakes:

Type:

4 ventilated discs, Girling

Distributor:

Type:	Marelli S 125 BX
Coil:	Marelli BZR 205 A

Dimensions - Spider (Pininfarina):

Wheelbase:	2280mm
Length:	4134mm
Width:	1710mm
Height:	1270mm
Front track.	1383mm
Rear track:	1381mm
Weight (unladen):	1240 kg (2734 lbs)
Weight (max laden):	1480 kg (3260 lbs)
Fuel tank:	70 litres, reserve of 6/9 litres (warning light)
Wheels:	Cromodora 6½ x 14 inch
Tyre pressures (Michelin XAS):	(f) 27 psi (r) 29 psi
Tyre pressures (Pirelli CN36):	(f) 30 psi (r) 32 psi

Dimensions - Coupé (Pininfarina):

Wheelbase:	2550mm
Length:	4507mm
Width:	1696mm
Height:	1315mm
Front track:	1390mm
Rear track:	1381mm
Weight (unladen):	1400 kg (3086 lbs)
Weight (max laden):	1720 kg (3792 lbs)
Fuel tank:	70 litres, reserve of 6/9 litres (warning light)
Wheels:	Cromodora 6½ x 14 inch
Tyre pressures (Michelin XAS):	(f) 31 psi (r) 34 psi
Tyre pressures (Pirelli CN36):	(f) 32 psi (r) 36 psi

Max Speed (Constructors' figures):

Spider:	over 210kph (130mph)
Coupé:	over 205kph (126mph)